Faux Weathered Gray Wood Grain Tutorial | Pretty Handy Girl

Do you love the Restoration Hardware tables that have that beautiful gray (driftwood-like) weathered wood? Me too. But, I can’t justify spending thousands of dollars on their furniture. Instead, I found a Craig’s List pedestal table that had the right shape and size for our kitchen. It was a cherry veneer finish, but after some paint you’d never know!

Faux Weathered Gray Wood Grain Tutorial | Pretty Handy Girl

And then, I created my own Faux Weathered Gray Wood Grain top. All you need are some Valspar paint samples, some wood grain tools and a dry brush to achieve this look.

Ready to get started?

Faux Finish Weathered Wood Grain Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Faux Weathered Gray Wood Grain Tutorial | Pretty Handy Girl

Faux Finish Weathered Wood Grain Base Coat and Glazes:

Faux Weathered Gray Wood Grain Tutorial | Pretty Handy Girl

Before you begin creating your wood grain, you should paint your surface with Valspar Woodrow Wilson Putty and allow it to dry.

Faux Weathered Gray Wood Grain Tutorial | Pretty Handy Girl

If you are painting furniture, lightly sand the piece. And be sure to use Valspar Paint + Primer in one. This will allow you to paint directly onto the furniture and skip the primer. Read more

Fall Accessories for the Screen Porch | Pretty Handy GirlHow to Turn a Craig’s List Bed Frame into a Garden Bench

While visiting one of Raleigh’s local shabby chic boutiques, I fell in love with a sweet bench made from an old bed frame. But, the $350 price tag meant that our relationship was not meant to be. I began scouring Craig’s List for the perfect bed frame to make into a bench in our front yard. Finally, I found a full sized cannonball bed frame that looked very similar to this one:

The bed was in good shape. It was made from real wood and it had wooden side rails. Best of all, the price was $40 (and I didn’t have to drive more than 3 miles to buy it!)

After researching the web for ideas on how I wanted my bench to look, I found this site: https://www.robomargo.com/bench.html which has many photos of bed frames turned into benches.

Then I stumbled across Karla’s bed over at: https://itsthelittlethingsthatmakeahouseahome.blogspot.com

Her husband had declared the bed frame a piece of junk when she asked him to turn it into a bench. I can’t help giggling now that I’ve seen the finished project:

Isn’t this bench A-DOR-ABLE!

Here is my best effort at directing you through the transformation from a bed to bench (I neglected to photograph the process on this project since it was a pre-blog project.)

Begin with the headboard and footboard, and set the side rails aside for now.

I pre-measured another bench and determined that I preferred a 18″ seat height. Luckily the footboard worked perfectly in my plans. But, I needed to trim 3″ off the bottom of my headboard legs.

Then determine the depth of your bench. I wanted mine to be 18″. (This is a little deeper than a chair (15 – 16″), but it allowed for pillows behind our backs and a more substantial size.

Your footboard needs to be cut in half so it can become your arm rests. You might have to trim more from the center as I did to achieve your desired bed depth.

What you are left with is two sides for your bench:

Now you need to grab one of your side rails and cut it down to size for the front skirt of your bench. Simply measure the distance of your headboard from post to post:

Then cut your side rail to this exact width. (Or if your bed frame came with metal sides, you can use a 1″ x 6″ x 8′ pine board instead.)

Now you will need to build a frame of 2″ x 4″ boards for stability. This frame needs to be able to fit between the front skirt piece (side rail cut to size) and the back of your bench (the headboard).

This is a picture of my bench tipped over so you can see the base support structure built of 2 x 4’s (in red).

Now you have all the components to construct your bench frame.

Attach the arm rest to the back of your bench (used to be the headboard) by pre-drilling holes through the bedposts and then screwing in 3″ long wood screws through the post and into the arm rest. Be sure that the arm rests are securely attached.

Here is a picture showing the screws from the back of my bench. and how the arm rest looks when attached.

Next you will attach your 2″ x 4″ frame to the back and sides of your bench. You can use screws, nails, and/or L-brackets to attach it.

Then, you can attach the front skirt piece (cut down side rail of bed) to the 2″ x 4″ support base using small nails or brads.

You are almost done with the construction! Time to cut some wood for the seat of your bench. I used two 1″ x 10″ boards cut down to size. Then cut out notches to fit around the corners of the bed posts.

Then use small nails or brads to nail your seat to the bench 2″ x 4″ frame.

After assembling my bench, I added wood putty to fill my nail holes and then caulked all the seams to keep water out of them.

I finished off my bench with one coat of spray primer and 2 coats of Rustoleum French Lilac spray paint (the color my boys picked out!)

Unfortunately, I neglected to coat my bench with polyurethane, so you will notice that the paint has chipped in places. After a few rain storms, I realized that my bed frame was made from several layers of wood that was glued together. So, you will also see some gaps in the wood.

After some time, I repaired and re-painted the bench. To prevent further splitting, my bench spends its days on our screen porch.

Fall Accessories for the Screen Porch | Pretty Handy Girl

If you want to learn how to make a custom piped bench cushion, head on over to this tutorial:

But, in the meantime, won’t you come join me for some cool lemonade in the shade?

Step right this way.
Did you spot the blooming hostas and hellebores?
 Oh, you were too busy staring at this lavender beauty?
Won’t you sit down in the cool shade…
…and sip some nice cold lemonade with me?
I hope you enjoyed this tutorial. Feel free to comment, especially if you have any questions.