12 DIY Home Storage Tutorials | Pretty Handy Girl

It’s January and you know what that means! Time to clean and purge the house of all the excess stuff. Last year I was too busy with projects to purge, so this year I’m taking advantage of some warmer days to clean out our home. I hope you’ll excuse me while I’m in clutter busting HELL mode. In the meantime you might enjoy these 12 DIY Storage Projects to help you organize your home (and hide clutter.)

mudroom_shoe_storage_bench
Make a Coat Rack from an Old Door
 and Make a Shoe Storage Bench with Kitchen Cabinets

full_flow_wall_above_washerLaundry Room Storage using Flow Wall Read more

Galvanized Tub Storage Bench for Kids | Pretty Handy Girl

Every month Lowe’s challenges me to create another unique project to share with you. This month’s challenge was creative storage ideas. Have kids? This is a unique storage solution using a galvanized tub and a furry upholstered lid. It’s the perfect place to store and corral all that kid clutter in your child’s bedroom. The storage tub doubles as a bench and a step stool. Don’t be deterred if you don’t have children, the storage bench could be used for magazine storage and much more!

Grab these materials and tools and follow along with me (and my 13 year old assistant.)

Creating the Galvanized Storage Bench and Lid

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Materials for the Galvanized Storage Tub and Lid:

Galvanized Tub Storage Bench for Kids | Pretty Handy Girl

 

Instructions:

Turn the galvanized tub upside down on the plywood. Use the sharpie to mark approximately 1/2 – 1″ out from the edge of the tub. Read more


This is one of the easiest tutorials I’ve every written. As a bonus, it is a no sew table cloth perfect for updating your outdoor table that has an umbrella.

While shopping at Target I stumbled across beautiful green link patterned table cloths. But, the sizes wouldn’t fit our square patio table. I was hanging my head in clear disappointment when I walked through the bath aisle and spotted the same pattern on a shower curtain! After using a shower curtain for a tablecloth on our screen porch, I knew this would be a great option for the patio table. I grabbed the shower curtain, did a fist pump, and sprinted to the register. As I neared the cashier, I wondered if I would finally beat the impossible game of “Can you buy less than $100 at Target?” (coming to a store near you.) Read more

Our office renovation is nearing completion. We’ve been working on the room for two plus months now. The majority of the work is complete, but we are waiting for two desk cabinets to come in to the Office Depot warehouse so we can actually order them. At this point I’m wondering if I should just build my own! <<Sigh>>

After searching for over a month on Craig’s List, I finally broke down and bought a small counter height bistro set from Big Lots for the corner of our office. We thought it would be a great place for the kids to sit and do homework. Or better yet, for Pretty Handsome Guy and I to talk and have our morning coffee!

The height and footprint is perfect, however, the dark wood (in addition to the other furniture in the room) made the room too dark for my taste. Okay – and I’m a sucker for hidden storage (need to hide that stop sign red box!) So, I came up with the idea to slipcover the table.

Unfortunately I didn’t have enough fabric left over from my yard sale re-upholstered chair and the back of the bookcase project. But, I did have enough to cover just the top of the table.

Then I bought two small 4′ x 5′ painter’s drop cloths for $5 each. I am seriously addicted to these must have fabrics! I already used a pair for our laundry room curtains and I bleached another one to make grain sack valances for our dining room at a later date.

So, anyone remember their geometry class? I barely remembered enough to figure out that the circumference of my 3′ diameter table is 9.42 (π x diameter or 3.14 x 3= 9.42). Therefore, two 5′ wide cloths would just cover my table!

The first thing I did was trim the fabric around the tabletop allowing a 1″ overage for seam allowance.

Then I ironed the drop cloths, and decorative table top fabric. I hate ironing  – I hardly ever iron. Usually I’ll just spritz water on my shirts or pants in the morning and they dry wrinkle free. Or if it is really wrinkled, I will dampen my clothing and toss them in the dryer for a few minutes.

Sometimes, I just have to break out the iron. But, I found a way to make ironing enjoyable. I set up my ironing board and watched a little HGTV or DIY Network while I de-wrinkle. Nothing like a hot DIY hunk to make me all steamy. Hee, hee.

I folded the top of the drop cloths so they just meet the table top and the bottom brushes the floor (this way I won’t have to hem the bottom.) Next I pinned the 2 drop cloth pieces around the table. Being sure to use lots of pins, since sewing around a curve can have a tendency to make the fabric pucker.

Then I stitched on top of the drop cloth, as close to the edge as I could. Being careful to avoid letting the fabric pucker.

After a few trial and errors, I got a smooth line and the drop cloth edges overlapped slightly.

Next the fun part! Digging in my grandmother’s button tin! She passed this down to my mother and somehow it ended up in my possession. (Shhhh, don’t tell my sisters!) I love this tin. The smell I encounter when I open the tin is part metal, part perfume, and 100% nostalgia.

I remember the feeling of running my fingers through the buttons. Isn’t this the prettiest eye candy? All those colors and textures.

<<snap of the fingers>> Okay, back to the project at hand. I chose four large brown buttons. Then eye-balled them on my slipcover and put a pin where each one would be attached.

I used a disappearing pen to mark the size of the button on the side that overlaps the other.

 
This is the first time I’ve used the buttonhole foot on my Brother CS-6000i sewing machine. (No, I’m not paid to endorse this sewing machine. I just can’t believe all the features it has for the $125 price!) I was impressed by the button holder that automatically tells the machine how big to make the hole.

The machine also has a feature where it can stitch your buttons on, but I knew it would take me longer to read and measure how to tell my machine where the holes in the buttons were. So, I sewed them on by hand.

And presto, I have a pretty bistro table with storage underneath!

And, a place to have morning coffee with Pretty Handsome Guy.
And, somewhere for the kids to do homework (or brush up on reading at Starfall.com.)

Visit thecsiproject.com