Welcome to Day 2 of my 31 Days of Handy Home Fixes. Today I’m going to show you a tip for fixing a rubbing or sticking door.
Day 2. Fixing a Sticking Door
Do you have a door in your home that rubs on the frame or gets stuck certain times of year? Our bathroom door used to stick in the summer (but not the winter.) The excess humidity in the air caused the door to swell just enough that it rubbed at the top of the frame. The fix literally took less than five minutes!
Take a look at your door and determine where the door is rubbing. Assess which direction you need to nudge the door to break the contact.
The simplest fix is to try loosening or tightening the door hinge screws. Take a look at the door below. The door was too tight in the upper left corner. To relieve the rubbing loosen the screws a half turn in that top hinge. Test the door again. You may also need to loosen the screws on the middle hinge and tighten the screws on the bottom hinge.
Is your door still sticking? Try removing the screws completely from the door frame. Instead of shimming with a wooden shim (which would be too thick) cut a piece of thin cardboard (think cereal boxes and product packaging) and inserted it behind the hinge. Then drive the screws back in.
95% of the time the above two tips will resolve your issues. If your door is still sticking, you may have to take more drastic measures like routing out more material from the door frame with a Dremel or using a power planer to trim down your door.
Check out other participants in Nester’s 31 Days Challenge.
Don’t miss a single tip! Sign up to get all the tips in your email:
Other tips in the 31 Days of Handy Home Fixes series: