It’s hard to stay organized when you are a DIY blogger, Mom, wife, cook, cleaner, taxi driver, and a student (taking evening classes for the general contractor exam.) I’ll be the first to admit that I’ve dropped a few balls in this massive juggling act. But, I strive to improve and part of that effort involved hanging a Family Organization Center Door next to the refrigerator. Did you know there was such a thing? Ha, me either until I saw this half window door at our local Habitat ReStore.
A vision of a place to plan meals, keep track of chores and keep reminders became clear in my head when I first saw it. Want to see how I took this old door and turned it into a family organization center? Hang around for a few minutes to find out.
(contains some affiliate links)
- Self Closing Gate Hinges (Pair)
- 4 – 2-1/2 Inch Hex-Head Lag Screws
- 6 – 1 Inch Hex-Head Lag Screws
- Socket Wrench
- Coax cable
- Heavy Duty Staple Gun
- Drill bits
- Rockwell JawStand
- Aviation Snips
After finding a door for your organization center, you may need to trim down the sides to fit your space. I had to trim an inch off each side of my door to fit on the side of our refrigerator cabinet. Use a circular saw to trim the door. Using a Kreg Rip Cut will help keep the saw straight.
For extra stability, you may want to add a caster on the bottom of the door (opposite the hinge side). This is not necessary, but will add extra support.
Cut scraps of coax cable to fit into the tops of the windows.
Working on the back side of the door, press the cable onto the glass up against the mullion (window grid) at the top of each divided light. Staple the coax cable to the window mullion. This provides some tension to shove papers under the cable and hold them against the glass.
You can barely see the cables at the top of each window, but they hold the paper behind the windows.
Hanging the Door with a Rockwell JawStand:
Working alone is tough, especially when hanging a door or holding something heavy. The kind folks at Rockwell sent me their JawStand to try. Hanging the door was the perfect opportunity to test the JawStand and have that extra set of hands.
Directly out of the box, the JawStand is compact and in two separate sections.
Start by rotating all three legs to open them (tripod style.)
Next, slide the clamp column into the tripod base.
Turn the clamp adjustment knob to loosen the clamp jaws.
Slide the JawStand onto the door.
Level and plumb the door. Make adjustments and then tighten the clamping jaws on the JawStand.
Securing the Gate Hinges:
Figure out the location the hinges will attach to the wall and the door. Locate a stud to mount the door onto. Mark the holes in the hinge with pencil.
Pre-drill a small hole. Then use the socket wrench to secure the lag screw through the hinge and into the wall stud.
Line the door up with the hinges. Pre-drill small holes through the holes in the gate hinge. Secure the hinge to the door with 1″ lag screws.
Repeat the same steps to hang the door from the second gate hinge.
When the door is securely hung, loosen the JawStand clamps and release the door. I can honestly say, hanging this door by myself would not have been possible without the JawStand, unless I had a second adult to hold it instead.
Test the door to make sure you can open it enough to access the papers behind the glass occasionally.
Slip your menu planner, chore lists, artwork or reminders in between the cable pieces and the glass.
And enjoy being organized! (I created the menu planner with images from The Graphics Fairy. Stay tuned for a downloadable version.) Who else loves Taco Tuesday and Pizza Friday? Not to be outdone by breakfast for dinner!
The boys can easily see their chores for each day and check off when they are done. The glass creates the perfect dry erase surface.
At the bottom of the door, I added some sheet metal that was transformed with Modern Masters copper paint and patina solution. We use it as a magnetic board. I’ll show you that copper painting process soon.
If you have a sharp eye, you may have noticed that I covered the original door knob and dead bolt holes with another piece of sheet metal and a face plate.
I’m curious what you think about our family organization center door?
Is it wacky or genius?
Disclosure: Rockwell sent me the JawStand for a product review. This is NOT a sponsored post. I was not paid to blog about the JawStand, nor was I told what to write about the JawStand. I will always disclose to you when you are reading a sponsored post or if a product was sent to me at no cost.
Pin for later!