Sharing is caring!

How to Build a Window Pane Lattice Privacy Fence and Gate

How to Build a Window Pane Lattice Privacy Fence and Gate

I should probably re-name this post How to Build a Window Pane Lattice Semi-Privacy Fence. But, honestly it’s only semi-private because the lots in downtown Raleigh are so close together and the next door neighbor’s driveway is against the privacy fence. All they have to do is lean against the fence and peek through to eliminate the “privacy” function. But, if we’re going to be honest here, their six foot picket privacy fence has cracks in it where the picket wood has shrunk. And, yes, you can see through their privacy fence too. But, in a suburban neighborhood, this fence would block the view from the road or a distance.

When I was considering fencing options for the Saving Etta project, I wanted to create a beautiful fence that was attractive to look at but also gives some privacy and security.

How to Build a Window Pane Lattice Privacy Fence and Gate

Why I chose to use a window pane lattice fence:

  1. I love the look. It’s a mixture of cottage and modern. And it’s perfect for a modern farmhouse style house.
  2. The new owners can train a flowering vine to grow up the lattice and create more privacy.
  3. It’s neighborly being able to see and talk to your neighbors next door. It fosters community!

As we drew closer to the holidays, I knew I had to push the accelerator on all the remaining projects at the Saving Etta project. Therefore, I did not build this fence, I hired a fence contractor to build it. But, I did design the fence and shared my design idea with the contractor. I took some inspiration from my Pergola with Trellis Screens.

Build a Pergola with Trellis to Screen Your Trash Cans | Pretty Handy Girl

The following tutorial is a basic construction guide for How to Build a Window Pane Lattice Privacy Fence and Gate. I didn’t oversee the construction, so I’m going to make some suggested fasteners, but ultimately you should gauge the strength of your fasteners especially when building the gate. If your gate is wider, you may need an additional cross or diagonal brace.

Tools & Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Before we get started, I want to express a huge thank you to Wood It’s Real for being a Saving Etta sponsor. As you might remember, they sponsored the side porch and the front flat sawn balluster project. And now, I have the honor of sharing yet another Wood It’s Real Sponsored project. Let’s learn How to Build Window Pane Lattice Privacy Fence and Gate using beautiful Southern Yellow Pine.

Wood It's Real Website

This build will take at least two days. Digging the post holes, setting the posts, and pouring the concrete for the posts can be completed on day one. But, you’ll want to wait overnight for the concrete to set up before building the fence panels. For more information on setting fence posts, you might find this tutorial by Quikrete helpful.

Before building your fence, be sure to research your local building codes; know if you have to meet any setback limits, and find out if you have any restrictive covenants for your neighborhood.

Building a Window Pane Lattice Fence:

How to Build a Window Pane Lattice Privacy Fence and Gate

To create the tall privacy fence, we used one 4′ x 8′ lattice sheet vertically between the posts. Therefore, our posts were set four feet apart. After your 6×6 fence posts are set in the ground, you can start building your lattice fence sections between the posts.

set fence posts

Instructions:

Measure and cut two 2×6 pieces of pressure treated lumber to fit between the top and bottom of the posts. Level and secure to the 6×6 posts using exterior grade wood screws.

secure-2x4 horizontal lumber

Center your 4×8 lattice panel in the center of the 6×6 posts. Cut 2×2 lumber to create a frame to support the lattice.

add 2x2 frame to secure lattice

Secure the 2×2 frame to the inside of the 6×6 posts and the 2×6 horizontal lumber. You can use wood screws or 2″ finish nails to secure the 2×2 frame. Add another 2×2 frame to the other side of your lattice.

secured-lattice fence section

Add post caps to the top of your fence to protect the posts from rot (and to make your fence look pretty.)

add post caps

How to Build a Window Pane Lattice Privacy Fence and Gate

Repeat the steps above to create as many window pane lattice fence sections as you desire.

completed window pane lattice privacy fence

How to Build a Window Pane Lattice Privacy Fence and Gate
Depending on the angle of sight, you can see some shapes through the fence. This is the view from the bathroom window. I’ll be sharing how I added complete privacy to this window in a later blog post.

How to Build a Window Pane Lattice Privacy Fence and Gate

From the bedroom you can barely see the neighbor’s car through the fence.

How to Build a Window Pane Lattice Privacy Fence and Gate

How to Build a Window Pane Lattice Gate:

How to Build a Window Pane Lattice Privacy Fence and Gate

To match the window pane lattice fence, I challenged my fence contractor to build matching lattice gates at the end of the driveway. I wanted the opening to be wide enough to drive a car through (should they want to park in the back of the house or get a delivery of mulch or other landscaping materials.)

Instructions:

Measure and cut your 2×4 pressure treated lumber. For a 4′ x 8′ gate, cut the vertical pieces exactly 8′ in length. The top and bottom pieces should be cut 41″ long. Secure the frame with pocket hole screws in the corners of the frame. (Click here to learn how to use a pocket hole jig.)

build 2x4 frame for gate

Lay the 4×8 lattice panel on top of the 2×4 frame. Tack the lattice in place using 1 ½” finish nails.

add lattice panel to 2x4 frame

Measure and cut your 1×4 lumber using the same measurements as the 2×4’s.

cut 1x4 frame to size

Secure the 1×4 boards to the lattice and the 2×4’s using 2 ½” exterior wood screws. (The lattice will be sandwiched in the middle and the screws should extend through the 1×4’s and the lattice and into the 2×4 frame.)

sandwich lattice between 1x4 and 2x4 frames

Your gate construction is complete. Add hinges and gate hardware and secure to a 6×6 post.

add gate hinges

These gates are rock solid and shouldn’t sag over time. The lattice keeps the gate square.

How to Build a Window Pane Lattice Privacy Fence and Gate

For a decorative touch, we added two 2×6 pieces of lumber across the two gate posts to create a pergola. The new owners can put a potted vine next to each post and allow the vines to grow up and over the pergola.

How to Build a Window Pane Lattice Privacy Fence and Gate

A metal drop rod is secured to the left side gate for stability and to keep both gates from swinging in when latching.

How to Build a Window Pane Lattice Privacy Fence and Gate

The window pane lattice provides plenty of privacy from the road. But, it also allows the homeowners a view to see if anyone is coming up the driveway.

How to Build a Window Pane Lattice Privacy Fence and Gate

What do you think? Do you like the window pane lattice fence and gates? Would you leave it natural or stain it?

How to Build a Window Pane Lattice Privacy Fence and Gate

Disclosure: This post is a sponsored post for Wood It’s Real. It was written as part of their sponsorship of the Saving Etta project. I was not told what to write. All words and opinions are my own. I am very particular about the brands I work with, and only partner with companies that provide quality materials and/or services.

3 replies
  1. Linda L.Weeks
    Linda L.Weeks says:

    What about painting some of that expanse white, to go with the steps nearby? It would still be nice to have some of the wood color in the mix. Looks great!
    ..less filling!

    Reply

Trackbacks & Pingbacks

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *