Sharing is caring!

A refinished wooden sideboard left with a natural stain – not painted! Learn how to refinish this sideboard.

Have you ever turned down a piece of furniture that looks ruined? Aha, today’s rocker is Emily and she has the superpower to make furniture look brand new again!  On the Rockstar DIY stage today is a performance you won’t forget. Emily will single-handedly take you through the steps of Refinishing a Mid-Century Sideboard.

Rockstar DIY Series

If you haven’t met Emily yet, she is truly a Rockstar! Emily lives in Rochester, NY and is ALWAYS working on an amazing home improvement project.

Emily-MerryPad

Emily can be found with a hammer, saw or drill in her hands at MerryPad. She has painstakingly renovated two homes. And, as if she wasn’t busy enough with home projects (and taking care of a baby and her step-daughter), she can also be found blogging at DIYNetwork’s Made + Remade. That girl is a machine!

Oh, I hear the sound of a sander, so put your hands together and give it up for Emily!

page_break_2

Hey guys! Super nice to meet you. If we haven’t already met, I figured there’s one thing you should know about me: I really like getting my hands dirty. Building furniture can be fun, and learning how to maintain my home has brought me a lot of pleasure, but if you see me and you notice my hands and arms are coated by stain? Well, you’ll know that I’ve been having a really good time (and I’ve probably run out of mineral spirits, again). Refinishing and restoring furniture–and cabinets, and floors, among other things–is one of my favorite DIY endeavors, always a fun learning experience, and always an opportunity to bring new life into an item that was once beautiful. I’ve had some lucky secondhand finds over the years, from bedside tables to chairs, but one of my favorite transformations was this Bassett Sideboard that I scored from a garage sale for $15.

How to refinish a vintage midcentury sideboard with scratches and water damage.

T’was one of my first refinishing projects, swoon.

If you’re tackling your first refinishing project (or just looking for tips), here are the products and tools I used for this makeover:

  • Detail palm sander and normal sandpaper to get into small crevices
  • Rags (general clean up cloths, and old rags or socks for applying the stain)
  • Tack cloths (the tack cloths are wonderful for cleaning all evidence of sanding dust before staining)
  • A paint brush and high-density foam roller (for application of the conditioner and polyurethane topcoat)
  • Pre-stain wood conditioner
  • Oil-based stain (for this piece I chose English Chestnut by Minwax)
  • Gloss polyurethane

An extraordinary amount of sanding went into eliminating the damage that had existed in the top surface. Scratches are relatively easy to cure, but you never know how bad the water damage is until you start sanding deep, as evidenced by this progress photo:

How to refinish furniture with scratches and water damage.

Elbow grease and a few more courses of low-grit sandpaper (80-120) helped to transform the surface of the sideboard into a raw wood state and eliminate the visible water rings. You might find that your water damage runs deeper – every case is different.

Sanding the topcoats off a wooden furniture.

Once the surface is cleaned (thank you tack cloths!), staining becomes your opportunity to transform the new prize. Pre-treat the sanded coat with wood conditioner for a more-even stain application, and then apply stain using a rag. Once dry, apply the polyurethane top coat to seal the wood.

Quick tip: Use a high-density foam roller to achieve even application of the poly, but drag a paint brush over the still-wet surface to eliminate stipple and bubbles.

How to apply polyurethane when refinishing vintage furniture.

The careful refinishing of the wooden exterior made this midcentury sideboard into the flawless piece that sits in our dining room today. It’s one of the few pieces that has transitioned really well as my family moved from house-to-house, and it’s the type of piece that I hope for which we always have space in our home.

A refinished wooden sideboard left with a natural stain – not painted! Learn how to refinish this sideboard.

Never ever turn down a $15 water stained sideboard! Thank you Emily!

Stay tuned for more of the Rockstar DIY series!

Rockstar DIY Series

Here is a list of the project performances so far:

 

Pin for later!

5 replies
  1. Shirley Belt
    Shirley Belt says:

    My daughter recently purchased a midcentury vintage dresser on Etsy,. When it arrived, the interior of the dresser was beautiful on the outside but the inside was covered with mold spores. Do you have any info on how to get rid of the mold.

    Your article on refinishing the dresser was quite informative.

    Thank you!

    Reply
    • emily @merrypad
      emily @merrypad says:

      Hi Shirley! Glad you enjoyed the project. My advice would be to dilute bleach (1 qt. water, 1/2 cup bleach), and use a rag or a sponge (squeezed to be just damp) to remove the mold. The surfaces were probably finished with a topcoat at some point, so the mold should come off easily and the bleach will help kill anything that’s still living, and clean the surface. Don’t rinse the piece because too much moisture could warp the wood, but allow it to air dry and check back to see if the mold is gone. I would also suggest testing this approach on a non-visible area to start.

      Reply
  2. Emily
    Emily says:

    I love finding project pieces like this! It’s like striking gold. The people who are selling them usually think fixing them up takes a lot of work, so they let them go for super cheap (just like this piece), but it’s actually not that bad… and I’ll gladly put in the bit of elbow grease if it means scoring some nice furniture for cheap! 🙂

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *