, , ,

Sanding Tutorial and Prepping a Branch Towel Bar

Sharing is caring!

We’ve moved several times and each time I’ve packed one special tree branch with us. I have had this branch so long that I can’t remember where I found it. I do know that I picked it up on one of our camping trips. Whether it was Yellowstone, Acadia, Nova Scotia or somewhere else I’ll never know. What I do know is that I kept it because I thought I could do something really special with it someday. Well, that day has arrived. I decided to turn the branch into a towel bar for my sons’ bathroom.

(This post contains affiliate links. To learn more about affiliate links, you can read my disclosure page.)


  • Tree branch stripped of bark and branches
  • Coping saw or other hand saw
  • Sandpaper (80, 120, & 180 grits)
  • Pencil
  • Scissors
  • Power sander
  • Gloves
  • Dust mask
  • Safety glasses



Start by sawing off any nubs, knots and sticks using a coping saw.

Pull out the sandpaper and power sander. 3M just sent me these color coded sandpaper sheets. I think the idea of color coding them is brilliant! It really helps you grab the right grit quickly. I give them two gloved thumbs up.

Stack your sandpaper sheets. Lay the sander along one edge of the papers and trace a line along the edge of the sander with a pencil. Be sure to leave excess on both ends to attach under the clips of your sander.

Cut the papers along the pencil line.

Load all three pieces of sandpaper into the sander (if possible). The coarsest grit (80 grit) should be on the outside, followed by the 120 grit and finally the 180 grit sandpaper.

Now you are ready to start sanding!

Here is a video tutorial on sanding the branch down. I’ve upped my level of professionalism, so I hope you enjoy my efforts.

Coming up next. Installing and finishing the branch towel bar.

21 replies
  1. Laura
    Laura says:

    Way neat! What a very cool idea! We own a tree service and I’m always looking for ways to incorporate what we do for a living in our home. There’s not a whole lot of neat tree stuff out there, so I’m definitely going to do this in our upstairs bathroom! Now, to get the hubs to save me some branches from his next job and not chip them all! 🙂

  2. Rukmini
    Rukmini says:

    I did comment there! In the giveaway post. Wow, love the branch. I have a stone wardrobe and for days I wondered what I can install there as a hanger. Steel looked ugly. I think I found what I was searching for. Wood in a black stone open wardrobe. Wouldn’t it be so scandinavian? What say?

  3. Maree
    Maree says:

    we been looking for towel rails we both like & hubby suggested making them out of tree branches! We have lots of ti-tree on our place with lovely strong, straight branches. Want to do 2 & maybe a holder for the toilet roll? Thanks for the vid.


Trackbacks & Pingbacks

  1. […] other day I showed you how to prep and sand a branch to make a towel bar. If you haven’t viewed that tutorial, you may wish to do so […]

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to kit @ DIYdiva Cancel reply

Your email address will not be published.