Sharing is caring!

How to Strip Paint off a Door | Pretty Handy Girl

Have you ever had to strip… paint off a door? (You must leave a dramatic pause after strip for the full effect! LOL. If you haven’t had to strip…paint off a door, consider yourself lucky. If you need to strip… paint, I have some tips and a tutorial for you!

How to Strip Paint off a Door

Here’s the back story: My home’s doors have been purple for over 7 years. I was over the dark and wanted some vibrancy. It was supposed to be a simple project. Just paint the front doors a beautiful green (Benjamin Moore Perennial Green.) I had tested the color on my custom house mailbox. That was TWO YEARS ago! (Life’s been a little busy, okay. Forgive me, I’ve been wrapped up in a major kitchen renovation.) All I had to do was get the paint mixed and get painting. Instead, I was caught in the middle of the DIY project from HELL!

How to Strip Paint Off a Door | Pretty Handy Girl

I had five doors to paint (front two doors, one side door and two wooden storm doors.) But, this DIY project was doomed from the start. My friend Holly was sweet enough to offer to help me paint. The week we were supposed to start on the doors her son came down with scarlet fever. A few days later as I was getting ready to paint them myself, MY SON got scarlet fever.

I finally got around to sanding and priming the front door. I was elated as I finally began to brush the paint onto the doors. Ahhhh. Beautiful green. I finished the first coat on the front doors. Then proceeded to the side door. When I went back to give the front doors a second coat…a problem exposed itself. Nooooooo!

The paint was NOT sticking properly. A light scratch revealed the purple paint beneath. Ugh! What?! Nooooooooooo.

How to Strip Paint Off a Door | Pretty Handy Girl

The paint was easily scraping off the front doors. I was miffed. I had done all the right things. I checked to make sure it was latex paint. I had sanded AND primed. And yet the paint refused to stick to the front door. My favorite paint guy and I could only deduce that perhaps at one time a previous homeowner used a chemical cleaner that was resisting the paint.

My only course of action was to strip… the paint off down to the bare wood and start over. I was crushed, I wanted to cry. Instead, I just got to work stripping. Here’s the best way to strip… a door if you find yourself in the unfortunate situation of needing to strip… paint.

Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

How to Strip a Painted Door | Pretty Handy Girl

Safety precautions:

  • It is imperative that you wear chemical resistant rubber gloves and eye protection while stripping paint. The chemicals (even the less toxic CitriStrip can be harmful to your skin or eyes.)
  • Work in a well ventilated area, or you may choose to wear a respirator (especially when using the mineral spirits.)
  • When working with power tools, like a power sander, wear adequate hearing protection. Continued exposure to loud noises even if they don’t seem loud at the time can damage your hearing.
  • Always check your paint ahead of time for the presence of lead paint. If you have lead paint, wear your respirator and do not sand the paint. Strip it off and clean up ALL the paint chips and debris. Seal it in a plastic bag and dispose of it in the trash.

Lead check Instant Lead Test | Pretty Handy Girl

  • Stripping paint is a DIY project that requires you to keep children away, especially if there is lead paint.

Instructions for Stripping Paint:

Here is a fairly thorough video showing you the process of stripping a door from start to finish:


Or you can read the step-by-step pictorial version here:

Begin by brushing CitriStrip onto your door. Cover all the paint with the stripper. Try not to brush over the stripper once you have applied it onto the door.

How to Strip Paint Off a Door | Pretty Handy Girl

Let the stripper sit for 15 minutes. (<—I’m trying so hard not to be corny and comment about that sentence.)

After 15 minutes (or if you see the paint bubbling), start scraping off the paint.

How to Strip Paint Off a Door | Pretty Handy Girl

Rotate your 5-in-1 Painter’s tool to see which edge works best at scraping along the different profiles.

How to Strip Paint Off a Door | Pretty Handy Girl

Needless to say, you will need to repeat applying stripper and scraping until you get down to the bare wood. Have patience, this process may take a while. (You can show me some sympathy as it took me three days to strip both doors. Granted, our doors had at least 5 coats of paint on them. So, there was lots of re-applying the stripper and waiting.)

Once you’ve removed the majority of the paint, use steel wool and/or the small wire brush dipped in mineral spirits to clean off more of the paint.

How to Strip Paint Off a Door | Pretty Handy Girl

Using a simple putty knife can help pry out any leftover gunk out of the corners and crevices.

How to Strip Paint Off a Door | Pretty Handy Girl

Once you’ve removed all the paint that is humanly possible to remove, wipe the door with a damp rag and allow it to dry thoroughly.

How to Strip Paint Off a Door | Pretty Handy Girl

Repairing the door:

After the door has dried, assess your door for cracks or gouges. Now is the time to patch any imperfections.

Be sure to use a stainable wood putty if you will be staining your door. I use the same wood filler regardless of whether I’m staining or painting.

For cracks in the door, scrape or sand off any rough or raised edges. Spread the wood filler and allow it to dry. Hand sand small spots or leave them and sand it while sanding your door.

How to Strip Paint Off a Door | Pretty Handy Girl

Sand the doors. Start with a 150 grit sandpaper. On the second sanding, switch to 220 grit, a finer grit sandpaper.

How to Strip Paint Off a Door | Pretty Handy Girl

Use a Dremel Multi-Max with the triangular sanding head to get into all the corners and grooves.

How to Strip Paint Off a Door | Pretty Handy Girl

After the sanding is done, use a vacuum cleaner to suck up most of the sawdust. Use the can of compressed air to blow additional sawdust out of the corners and crevices.

How to Strip Paint Off a Door | Pretty Handy Girl

Follow up with a damp rag to wipe any additional sawdust off the door.

How to Strip Paint Off a Door | Pretty Handy Girl

This is where I spent 45 seconds enjoying the beautiful fruits of my labor.

How to Strip Paint Off a Door | Pretty Handy Girl

Faster than you could say strip…paint off a door, the moment was gone and I had popped open the can of primer and started over again. (So depressing.) I wish I could have left the doors wood, but they aren’t in great shape and our side door was already painted a pretty vibrant green at this point.

How to Strip Paint Off a Door | Pretty Handy Girl

After the primer dried, I gave each door two coats of Benjamin Moore Perennial Green.

How to Strip Paint Off a Door | Pretty Handy Girl

Yup, it only took two years and three days of stripping, but I finally have beautiful and colorful doors. The green is so pretty with my newly freshened up front flower beds. (More on that process another day.)

How to Strip Paint Off a Door | Pretty Handy Girl

What is the worst DIY project you’ve ever been involved in? I’d love to hear about your DIY Hell! It might make me feel better at this point because I’m depressed that I spent an entire week painting my doors.

How to Strip Paint off a Door

How to Strip Paint off a Door

Disclosure: I am proud to be a 3M- sponsored blogger, and, as part of my responsibilities, I get the opportunity to evaluate new products from 3M DIY. Opinions are my own and additional product used in the project were selected by me.

For more great DIY tips visit 3M:
3M DIY Website3M DIY Facebook 3M DIY Twitter 3M DIY Pinterest

 

Pin for later!

How to Strip Paint off a Door

58 replies
  1. Maggie S
    Maggie S says:

    I can’t believe you wrote this –I have to strip my front door. It is bubbled and the paint is cracked. I have been putting it off–thanks for the inspiration (and the safety tip about the led paint –I never thought about that)

    Reply
  2. Colleen Taylor
    Colleen Taylor says:

    Oh my GAWD!!! When I started reading this, I ran out of my office with my hair standing up on end screaming like a crazy banshee. Well almost I did. My goodness gracious are you a women of patience or what!?! This looks like the project from HELL. & I applaud you with the end result. It’s just stunningly beautiful & oh so vibrant!
    I didn’t go through anything like you did but not too many years ago, I bought this house with more work in it that I care to talk about. My front door had been stained, rained on, blistered, beaten, bitten & gouged by the family dog in addition to who knows what else by the former owners. I sanded & patched that forever, painted & it turned out awesome.
    Oh I don’t know if I dare to tell you one of my worst. OK, same house, my daughter & armed with sheet rock knives, donned with gloves & masks, cut up the urinated & feces stained carpet & padding through this entire house, dragging it out to the commercial dumpster. Then I had to prime every single area of this 5K sq ft house (that didn’t have hardwood) with an oil based primer to kill all the bacteria. This was a foreclosure that I bought (literally stole) in a high end beautiful neighborhood to boot! The entire house was drop dead gorgeous when I was done with it. Lived there for 7 years. I’ve written too much already but I do have more stories about this one! YES, I sold it for a huge profit but I earned every penny.

    Reply
  3. Beth @ Sawdust and Embryos
    Beth @ Sawdust and Embryos says:

    YES! I love stripping puns! Ugh… I’m not gonna lie, I loved those naked doors of yours when you were done stripping (and even the middle grungy stage) but they look pretty fancy in green too! At least you know you can’t go wrong with those doors in the future! However I venture to guess you will NEVER strip them again… haha!

    Reply
  4. Nancy W
    Nancy W says:

    Love reading your blog! Those doors are beautiful. I am going to change my front door soon, from a drab dark green to a purplish violet. Now I am very inspired!
    I am a pretty handy woman with lots of goofs under my tool belt. Lots of proud moments too, there’s always one to go with the other it seems…
    Recently I had to strip a couple of original hall closet doors, and even though they are mostly a flat surface, it was latex over oil based paint, so it was difficult and messy with the citristrip. I ended up using a heat gun which worked fast and clean. I’m not sure if it matters if you have lead in your paint when you use a heat gun.
    Thanks for sharing your gorgeous projects and getting me motivated.

    Reply
  5. Catherine
    Catherine says:

    I have a desk that is going to need stripping to refinish. I am scared now! I love how your doors turned out. Just a gorgeous colour with your garden. I have an orange front door so bright colours don’t scare me!

    Reply
  6. laura
    laura says:

    Hey Brittany – I so feel your pain. We just bought a house which the day before closing found that all the trim (interior and exterior) doors included had latex over oil paint. The money given to us by the seller nowhere near covered what it has cost us to scrape, and in some cases replace trim work. I then tried to go the non smelly route and use kilz latex primer over the oil since it says that it can be used over oil…but not this oil. I had painted two exterior doors and noticed that the paint was peeling again…I just finished scraping the front door again this weekend, and used an oil based primer this time. I feel like this has been the year I lost myself in an abyss of latex over oil paint. I don’t think I will ever be able to walk into a house and not run my fingernails over the trim to see if it will peel off. I am scarred for life. Your green doors are beautiful though – well worth the time and effort!

    Reply
  7. Marne
    Marne says:

    Hey Brittany! Glad I found this while searching for how I go about stripping the red paint off of my front door and restore it to it’s natural wood beauty. This perfectly describes what to do!
    Question for you though- I see that you left your doors on the hinges for this. Is it a personal preference to do so instead of removing the door (obviously that’s a step worth skipping)? Were there any drawbacks to leaving it hung?

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Marne, yes, our front doors are extremely heavy. They are solid wood and I knew I wouldn’t be able to get them back on myself. Painting them off the hinges is easier, but not enough to warrant me struggling with them ;-).

      Reply
  8. Adrian Hasenbauer
    Adrian Hasenbauer says:

    Thank you for this wonderful tutorial! I bought an old wooden door that was painted several times. I follwed your instructions – and I have successfully stripped off the 5-6 layers of paint down to the wood! I actually had to do 2 passes of the Citristrip. I did it once which got me through 2-3 layers of paint. Then I added another coat of the stripper – the next day and the last layers of paint came off very easily.

    This is definitely a labor of love, but well worth it! I paid $140 for a solid, well crafted used door + the cost of supplies – which is way less than what a brand new door would cost!

    I am now allowing it to dry before I finish up the project. Thank you again for the very detailed information, it was very helpful (and my husband is impressed I tackled it)!

    Reply
  9. Sally
    Sally says:

    Yikes, I like to paint, but my experience is limited to interiors. I need to repaint my red front door. It faces west, so after 10 years, the paint has faded out and the door’s decorative moulding paint has cracked. I’m going to paint it the very same color to get it back to the original red. Do I have to strip it completely? I thought I might just scrape and do a little gentle sanding over the cracked moulding crevices, clean it off and start painting. The rest of the door is fine , except the faded color. The cracks are in the moulding crevices only. What do you think?

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Sally, you may not have to strip your door. If you know that you front door is latex, you can paint right over it with more latex. OR oil paint? Paint over it with oil paint. For some reason my door paint was resisting the new paint. Otherwise, I wouldn’t have stripped it.

      Reply
  10. chris
    chris says:

    Hi, you did such a great job with this! Once you had the door stripped and repaired, could you have stained it if you wanted to? Do you think it would have come out looking nice with a dark stain? I have an old, painted front door and am considering stripping and then staining it. Thanks for any advice!

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Oh Chris, if you only knew how badly I wanted to do just that. The door was cracked and worn too much to look good stained. But, yes, you certainly can strip and stain your door. Best of luck!

      Reply
  11. Kristina
    Kristina says:

    Hi there!

    If you’re still reading this, we’re trying to do a cost/benefit of stripping vs just buying a new door.
    As an estimate, this took you, an experienced DIYer, 3 full days to complete – so around 30 hours?
    Adding on my lack of experience, this might be a 40+ hour job, plus cost of materials?
    Would that be a sound estimate?

    Thanks for any advice!
    Kristina

    Reply
  12. Charles Graves
    Charles Graves says:

    Hey, Charles with Charles Graves Painting here. Based out of northern VA.

    You actually wouldn’t have needed to strip the doors. That’s like doing surgery for a sprained ankle.

    Here is where you should have started:

    1) was purple paint oil based, or latex based? If it’s been purple since you bought the home, it could very likely have been oil based paint. Or even if you painted the door yourself 7 years ago, you perhaps could have used a solid stain (solid stain is also oil based).

    2) If the undercoat was oil based, then you should have sanded with 150 then 220 grit sandpaper, THOROUGHLY, then applied an OIL BASED PRIMER (Sherwin Williams all purpose adhesion primer, to be exact, which is specially made for adhesion, for wood and metal).

    3) if the undercoat was 100% latex based, you most likely just did not sand well enough. (Remember- you want to use 150 grit sandpaper and THEN 220 grit sandpaper, so that you really get good “tooth”).

    Reply
    • Charles Graves
      Charles Graves says:

      Also: for the commenter who mentioned having to “scrape and strip all her interior trim”- I have to say, why wouldn’t you just replace the interior trim?

      It is FAR CHEAPER and faster to just replace baseboards, door trim, etc.

      About the only thing I might consider not replacing would be

      1) window sills, as that can be complicated due to some cases them being part or attached of the window

      2) “antique” trim which is historical or valuable so you don’t want it removed

      3) collectors or discontinued Moulding which is beautiful etc

      Aside from that, I would say, trim is $1-$4 per linear foot on average only. Often baseboards and door trim is on the low end of that.

      Just replace! Need Measuring tape, miter saw, level, chalk line and a few other tools and you’re good to go

      As always we do that project as well 😉

      Reply
      • Brittany Bailey
        Brittany Bailey says:

        Charles, thank you for your comment. I’ve painted my fair share of doors and always know to check latex vs. oil. This door was definitely latex because I knew the previous owner who painted it and she even left the paint for me in the garage. I did indeed sand it very well. I talked to my paint pro and we think either a cleaner was used on the door at some point or the heat build up between the storm doors and the house doors altered the structure of the paint making it resist a new coat of latex. Believe me, I never would have anticipated having to strip the doors, but sometimes you have to do the difficult thing to get a professional result.

        Reply
      • DaisyP
        DaisyP says:

        Firstly, not everyone has the money to replace the trim throughout their house. Secondly, even if you can afford it, it’s absolutely wasteful if the only thing wrong with it needs a little elbow grease.

        Reply
    • Shirley Worden
      Shirley Worden says:

      The doors are over 85 yrs old, I presume they have oil base stain and or varnish on them and they are almost black in color not purple.I believe they need to use a good liquid stain remover and you tell me what you would suggest, thank you, Shirley

      Reply
  13. erin@whalingcitycottage
    [email protected] says:

    This is so beautiful! That color. Oy! And you’re giving me hope. I’m about a strip a very old and paint-laden door at our house. It won’t be pretty. But hopefully the end result will be. Thanks for the kick in the pants.

    Reply
  14. Jessie
    Jessie says:

    I so feel your pain– I started my own stripping project this weekend (and we are loving all the stripping jokes too!). Your beautiful door has given me hope that there will be light at the end of the tunnel. Thanks for sharing your tips about clean up– haven’t gotten to that step yet but I know your tips will be helpful!

    Reply
  15. Mary Kinney
    Mary Kinney says:

    I thought I could just sand my oil based door and then paint with latex paint. Boy was I wrong. I am now going to have to strip it and start over. I hope it will be fairly easy. I have stripped furniture that had been painted…hutch, side board and china closet. The door has no windows, so hope this goes fast. Fingers crossed.

    Reply
  16. Monica
    Monica says:

    Awesome post. When I saw the before pics of your door I smiled because that is exactly what I am dealing with right now. I bought a 125 year old house and the front door looked like crape paper. So far I have scraped 4 layers of paint off and am not looking forward to picking up where I left off this weekend. I just know there has to be beautiful wood under all that paint. And like you, I’ll be painting with a Benjamin Moore Camel color.
    Thanks for the chuckle.

    Reply
  17. Bernadette
    Bernadette says:

    Hey Brittany, great post. I am about to venture into a stripping job :))
    Question – did you leave the doors hanging as you worked on them? That would make life so much easier for me, as I will be working on a shed door and don’t really want to remove it.

    Thanks for the tips,
    Bernadette

    Reply
  18. Brittany Bailey
    Brittany Bailey says:

    The doors definitely will get some moisture from the citristrip. But, using the mineral spirits seemed to dry it enough for me to sand and prime the next day. I would definitely recommend making sure the door is dry to the touch before priming. Especially if you’ve had rain in the forecast.

    Reply
    • Jody serritella
      Jody serritella says:

      Thanks so much Brittany! I will try the mineral spirits. I worked on the doors today (again!) and am maybe 95% done with removing all the paint. Hopefully tomorrow I will be done removing all the paint and soon be able to paint the new color! Yippee!
      Jody

      Reply
  19. shanna stowe
    shanna stowe says:

    I’m about to tackle a door, but I have stripped a very old table (dated 1875 underneath). latex white, then under than was some sort of shellacy beige that the stripper only softened somewhat, then under that was blue paint that just instantly turned liquid with the stripper. Needless to say this was a long job. I’m very proud of the result, but whew. I appreciate your pictures of the tools you used to get to the details and little spots without damaging the wood. My experience is that softer woods like pine are easily damaged sharp tools after being treated with stripper. I never quite knew what to do with the mineral spirits. Thanks for a great demo.

    Reply
  20. Jeanne
    Jeanne says:

    Oh, that is a beautiful color! I would’ve been hardpressed to paint it once I seen it down to bare wood too!
    My project from hell is tackling a double window and door frame in my dining room. Maybe it wouldn’t have been so bad had I read your post first. My first mistake was thinking the stripper would be enough just with one application. Knowing ahead what to expect is far less spirit dampening than seeing the less than desirable results of a product that is doing the job but less than what you initially thought it should. My spirits are now renewed and there just may be a light out of this diy hell I created. Thank you for sharing!

    Reply
  21. Verbena
    Verbena says:

    I was always told that as long as the lead paint stays wet, and you are not sanding it, it’s safe. Is that not the case anymore?

    Reply

Trackbacks & Pingbacks

  1. […] admit it, I’m crushing on green doors lately. If you know me well, you know that I painstakingly stripped my front doors a few years ago and repainted them bright green. Now I’ve been thinking more and more about front door colors for Saving Etta. I hope […]

  2. […] Moore Perennial Green). The front doors are beautiful now, but this project turned out to be the DIY project from HELL! If you ever need to strip paint off your front door, I have some tips and a tutorial for […]

  3. […] Moore Perennial Green). The front doors are beautiful now, but this project turned out to be the DIY project from HELL! If you need to strip paint off your front door, I have some tips and a tutorial for […]

  4. […] Each door is different. And so is each project. As my door painting endeavor unfolded and it became clear that the paint would not come off easily with a chemical stripper, I was advised to sand down the remaining paint to create a smooth surface. Yet even after using a power sander, the door was a bit bumpy. If we weren’t planning on replacing the door in a couple of years, I would have used a stronger chemical stripper or continued with the sander for a lot longer. But since I had limited time, I decided to go ahead and pull the plug on the sanding phase after a long afternoon of work. [photo from Pretty Handy Girl] […]

  5. […] Each door is different. And so is each project. As my door painting endeavor unfolded and it became clear that the paint would not come off easily with a chemical stripper, I was advised to sand down the remaining paint to create a smooth surface. Yet even after using a power sander, the door was a bit bumpy. If we weren’t planning on replacing the door in a couple of years, I would have used a stronger chemical stripper or continued with the sander for a lot longer. But since I had limited time, I decided to go ahead and pull the plug on the sanding phase after a long afternoon of work. [photo from Pretty Handy Girl] […]

  6. […] How to Strip…Paint Off a Door […]

  7. […] Source – Pretty Handy Girl […]

  8. […] Bright Colored Front Door via Hometalker Brittany @Pretty Handy Girl […]

  9. […] Bright Colored Front Door via Hometalker Brittany @Pretty Handy Girl […]

  10. […] Bright Colored Front Door via Hometalker Brittany @Pretty Handy Girl […]

  11. […] me tell you how this happened. Remember when I was in the middle of the DIY project from HELL?! I tried to paint our front doors on the outside and the paint was peeling off. I wanted to curl […]

  12. […]  Hello Pretty Handy readers! I’m Colleen from Just Paint It! Blog and today I have a collection of 32 gorgeous colorful doors to inspire your next curb appeal project. With warmer temps here, most of us are spending more time outside, sprucing up our yards and outdoor spaces. One simple way to make a big impact is to paint the front door (and if you have to strip it first, check out this great tutorial for stripping paint with video tutorial.) […]

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *